Beta 43 Saildrive

Technical Specifications

A general guidance for propeller size in inches, based upon 3 blade RH rotation and reduction ratio of 2:1. * For accurate individual advice please provide us with your vessels current full specifications.

Standard Specification:

RCD 2 (Recreational Craft Directive 2013/53/EU) exhaust emission compliant.
EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant.
Note: Extra charges apply and this must be specified at time of order. Mechanically governed comes with:
Heat exchanger, header tank and water cooled exhaust manifold.
Fresh and sea water pump, injection bend for a wet exhaust.
Mechanical fuel lift pump, fuel and oil filtration.
Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
Special quiet air intake filter.
Shallow sump.

70 Amp, 12 Volt battery charging alternator.
Complete with ‘ABV’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternators ‘no charge; 3m interconnection cable with multi pin plug connector.
Heavy duty engine feet and flexible mountings.
‘Morse’ type end fittings for engine speed and gearbox control.
Engine test certificate and operators manual.